VIBER 80 This model of freestyle skates is suitable for both beginners and
experienced skaters with a medium to wide foot. The skeleton of the skate is
well ventilated - ventilation reaches the foot thanks to a ventilated liner,
which contains holes around its entire circumference, including the tongue. A
screw with a special nut and washer is used in the skate joint, thanks to which
the cuff is replaceable and can be tightened if necessary, it also guarantees a
longer service life than the articulated rivet. The upper metal self-locking
buckle has a bend at the end for a better grip. The strap is inserted into the
skeleton so that it does not catch on the second skate during slalom and
freestyle, the buckle itself is protected against damage by the lower plastic
boss. The instep strap is equipped with a single-stage micro buckle with very
comfortable tightening and loosening thanks to the ratchet system. The plastic
protectors on the outside of the skates are replaceable, as is the instep strap.
The holes for the laces are fitted with strong metal rings for the protection of
the laces and better tightening. Thanks to the use of waxed laces with a width
of 10mm, it is possible to tighten the laces gradually and to close the skeleton
of the skate more effectively. The skate liner is ventilated, has holes around
its entire circumference and reinforced with PVC at the top. There is an elastic
neoprene in the area of the fingers to increase comfort. In the back, there is a
loop with a reflective strip. Reflective parts are also added on the outside of
the skate. In the area of the Achilles tendon, the liner is lowered and shaped
into a V-shape, which enhances manoeuvrability and mobility, and thus easier
execution of freestyle tricks and moves. The liner has cut-outs in the area of
the ankle bend sewn with elastic neoprene, which achieves optimal anatomical
dispositions of the liner while maintaining its rigidity. The lower part of the
liner uses a material that slides less in the skeleton. The shoe has an
anatomical insole with a thickness of 3 mm, which is comfortable enough, yet not
too soft. Under the liner in the heel part, the shock-absorbing silent block
made of TPR material, which perfectly absorbs vibrations and shocks, is fairly
thick, soft and comfortable. The tongue of the liner is sufficiently stiff and
thick, it consists of 2 parts, so it perfectly copies the instep of the foot.
The tongue holds the position well thanks to the use of a drawstring. The
chassis made by CNC is strongly reinforced with a three-dimensional structure,
very strong, stable and precise. The chassis is attached to the shoe with 2
central bolts and 2 robust aluminium blocks with threads. Thanks to these
blocks, the transmission of power is significantly more efficient. The chassis
can be adjusted transversely and longitudinally. The hollow axles for weight
reduction have a diameter of 8mm and are mounted on the left skate on the inside
and on the right skate on the outside to prevent the screws from loosening while
riding. Chassis mounting dimensions: 165mm Bearings: quality ABEC-9 chrome with
rubber duster for easy cleaning and maintenance Chassis size (wheelbase): 37-40:
235.5 mm, 41-46: 247.5 mm Wheels: PUC, SUPER HI-REBOUND 85A Size 37-40 wheels
4*76x24mm Size 41-45 wheels 4*80x24mm Size: 37- 45