GIGABYTE Alaplap S1700 H610M H INTEL H610, mATX CPU LGA1700 socket:
Support for 13th Generation IntelŽ Core? Processors and 12th Generation IntelŽ
Core?, PentiumŽ Gold and CeleronŽ Processors* L3 cache varies with CPU *
Please refer to CPU Support List for more information. Chipset IntelŽ
H610 Express Chipset Memory 13th Generation IntelŽ Core? i9/i7
processors: Support for DDR5 5600/5200/4800/4400 MT/s memory modules 13th
Generation IntelŽ Core? i5/i3 and 12th Generation IntelŽ Core?, PentiumŽ Gold
and CeleronŽ Processors: Support for DDR5 4800/4400 MT/s memory modules 2 x
DDR DIMM sockets supporting up to 64 GB (32 GB single DIMM capacity) of system
memory Dual channel memory architecture Support for ECC Un-buffered DIMM
1Rx8/2Rx8 memory modules (operate in non-ECC mode) Support for non-ECC
Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules Support for Extreme Memory
Profile (XMP) memory modules (Please refer Memory Support List for more
information.) Onboard Graphics Integrated Graphics Processor-IntelŽ HD
Graphics support: 1 x D-Sub port, supporting a maximum resolution of
1920x1200@60 Hz 1 x HDMI port, supporting a maximum resolution of 4096x2160@60
Hz * Support for HDMI 2.1 version and HDCP 2.3. ** Support native HDMI 2.1
TMDS compatible ports (Graphics specifications may vary depending on CPU
support.) Audio RealtekŽ Audio CODEC High Definition Audio
2/4/5.1/7.1-channel * You can change the functionality of an audio jack
using the audio software. To configure 7.1-channel audio, access the audio
software for audio settings. LAN RealtekŽ GbE LAN chip (1 Gbps/100
Mbps) Expansion Slots CPU: 1 x PCI Express x16 slot, supporting PCIe
4.0 and running at x16 Chipset: 1 x PCI Express x1 slot, supporting PCIe
3.0 and running at x1 Storage Interface Chipset: 1 x M.2 connector
(Socket 3, M key, type 2280/2260 PCIe 3.0 x4/x2 SSD support) 4 x SATA 6Gb/s
connectors USB Chipset: 4 x USB 3.2 Gen 1 ports (2 ports on the back
panel, 2 ports available through the internal USB header) 4 x USB 2.0/1.1
ports on the back panel Chipset+USB 2.0 Hub: 4 x USB 2.0/1.1 ports
available through the internal USB headers Internal I/O Connectors 1
x 24-pin ATX main power connector 1 x 8-pin ATX 12V power connector 1 x CPU
fan header 2 x system fan headers 1 x M.2 Socket 3 connector 4 x SATA
6Gb/s connectors 1 x RGB LED strip header 1 x front panel header 1 x front
panel audio header 1 x USB 3.2 Gen 1 header 2 x USB 2.0/1.1 headers 1 x
Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module
only) 1 x serial port header 1 x Clear CMOS jumper Back Panel
Connectors 1 x PS/2 keyboard port 1 x PS/2 mouse port 1 x D-Sub port 1
x HDMI port 2 x USB 3.2 Gen 1 ports 4 x USB 2.0/1.1 ports 1 x RJ-45 port
3 x audio jacks I/O Controller iTEŽ I/O Controller Chip H/W
Monitoring Voltage detection Temperature detection Fan speed detection
Water cooling flow rate detection Fan fail warning Fan speed control *
Whether the fan speed control function is supported will depend on the cooler
you install. BIOS 1 x 128 Mbit flash Use of licensed AMI UEFI BIOS
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 Unique Features
Support for APP Center * Available applications in APP Center may vary by
motherboard model. Supported functions of each application may also vary
depending on motherboard specifications. @BIOS Ambient LED EasyTune
Smart Backup System Information Viewer Support for Q-Flash Support for
Xpress Install Bundled Software NortonŽ Internet Security (OEM
version) LAN bandwidth management software Operating System Support
for Windows 11 64-bit Support for Windows 10 64-bit Form Factor
Micro ATX Form Factor; 23.0cm x 21.5cm