Kültéri! HARDWARE FEATURES Processor Qualcomm Atheros Enterprise AR9350B 560MHz
CPU, MIPS 74Kc Memory 64MB DDR2 RAM, 8MB Flash Interface 1 10/100Mbps Shielded
Ethernet Port (LAN0,Passive PoE in) 1 10/100Mbps Shielded Ethernet Port (LAN1,
Passive PoE Passthrough) 1 Grounding Terminal 1 Reset Button Dimensions ( W x D
x H ) 224 x 79 x 60 mm Antenna Type Built-in 13dBi 2×2 Dual-polarized
Directional Antenna Beam Width: 45° (H-Plane) / 30° (E-Plane) Note: For more
details, please refer to datasheet Protection 15KV ESD Protection 6000V
Lightning Protection Power Consumption 13 Watts Max Note: When deployed using
Passive PoE, the power drawn from the power source will be higher by some amount
depending on the length of the connecting cable. Power Supply Passive Power over
Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC Enclosure Outdoor
ASA stabilized plastic material IPX5 waterproof Certification WIRELESS FEATURES
Wireless Standards IEEE 802.11a/n (with Pharos MAXtream disabled) Proprietary
Protocol TDMA Mode (with Pharos MAXtream enabled) Wireless Speeds Up to 300Mbps
(40MHz,Dynamic) Up to 144.4Mbps (20MHz,Dynamic) Up to 72.2Mbps (10MHz,Dynamic)
Up to 36.1Mbps (5MHz,Dynamic) Frequency 5.15~5.85GHz Note: Available operating
frequency may vary depending on the limitations of the countries or regions in
which the device is used. Reception Sensitivity ? 802.11a: 54M: -75dBm, 48M:
-76dBm, 36M: -83dBm, 6-24M: -95dBm ? 802.11n: MCS15: -73dBm, MCS14: -74dBm,
MCS13: -76dBm, MCS12: -80dBm, MCS11: -83dBm, MCS10: -88dBm, MCS9: -90dBm, MCS8:
-93dBm, MCS7: -73dBm, MCS6: -74dBm, MCS5: -76dBm, MCS4: -80dBm, MCS3: -83dBm,
MCS2: -88dBm, MCS1: -90dBm, MCS0: -93dBm Transmission Power 27dBm/500mw
(Adjustable power by 1dBm) Note: Maximum transmission power may vary across
different channels depending on the limitations of the countries or regions in
which the device is used. SOFTWARE FEATURES Wireless Configurations Pharos
MAXtream TDMA Technology 802.11a/n Modes Selectable Channel Width: 5/10/20/40MHz
Automatic Channel Selection Transmission Power Control Dynamic Frequency
Selection (DFS) WDS Enable/Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK
(AES/TKIP) Encryption, 64/128/152-bit WEP Encryption SSID Broadcast
Enable/Disable Multi-SSID with VLAN Tagging (AP mode only) Distance/ACK Timeout
Setting Wireless MAC Address Filter Wireless Advanced: > Beacon Interval/RTS
Threshold/Fragmentation >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi
Multimedia Management Discovery and Remote Management via Pharos Control
application HTTP/HTTPS Web-based management System Log SNMP Agent(v2c) Ping
Watch Dog Dynamic DDNS SSH Server System Tools Wireless Signal Quality
Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory Monitors:
Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer Speed Test
Ping Traceroute System-level Optimizations Optimized IGMP Snooping/Proxy for
multicast applications Hardware watch dog OTHERS Certification CE, FCC, RoHS,
IPX5 Package Contents Outdoor Wireless CPE 24V 1A Passive PoE Adapter Pole
Mounting Straps AC Power Cord Installation Guide System Requirements Microsoft
Windows 98SE, NT, 2000, XP, Vista? or Windows 8, Windows 7, MAC OS, NetWare,
UNIX or Linux. Note: We recommend you to use one of following Web browsers for
an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are
not recommended. Environment Operating Temperature: -30°C~70°C (-22?~158?)
Storage Temperature: -40?~70? (-40?~158?) Operating Humidity: 10%~90%
non-condensing Storage Humidity: 5%~95% non-condensing POE ADAPTER FEATURES
Button Remote Reset Button Certifications
CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark Dimensions(W x D x H)
110*57*33.5mm Efficiency >80% Input 100-240VAC, 50/60Hz Input Current 0.8A Max @
100VAC Input Voltage 100VA~240VAC @ 50Hz~60Hz Interfaces 1 AC Jack with Earth
Ground 1 10/100Mbps Shielded Ethernet Port (Power + Data) 1 10/100Mbps Shielded
Ethernet Port (Data) Output 24VDC, 1.0A Max +4, 5pins; -7, 8pins. (Support up to
60m Power over Ethernet) Output Voltage 24VDC(+4,5pins; -7,8pins) Power Status
LEDs 0~0.8A: Green 0.8A~1.0A: Red