LGA1700 socket: Support for the 13th, and 12th Generation IntelŽ Core?, PentiumŽ
Gold and CeleronŽ ProcessorsL3 cache varies with CPU * Please refer to "CPU
Support List" for more information.IntelŽ Z790 Express ChipsetSupport for DDR5
8266(O.C) / 8200(O.C) / 8000(O.C) / 7950(O.C) / 7900(O.C) / 7800(O.C) /
7600(O.C.) / 7400(O.C.) / 7200(O.C.) / 7000(O.C.) / 6800(O.C.) / 6600(O.C.) /
6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) /
5200(O.C.) / 4800 / 4000 MT/s memory modules4 x DDR5 DIMM sockets supporting up
to 192 GB (48 GB single DIMM capacity) of system memory Dual channel memory
architectureSupport for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate
in non-ECC mode)Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory
modulesSupport for Extreme Memory Profile (XMP) memory modules (The CPU and
memory configuration may affect the supported memory types, data rate (speed),
and number of DRAM modules, please refer to "Memory Support List" for more
information.)Integrated Graphics Processor-IntelŽ HD Graphics support:- 1 x
DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz* Support for
DisplayPort 1.2 version and HDCP 2.3RealtekŽ ALC1220-VB CODEC* The front panel
line out jack supports DSD audio.ESS ES9118 DAC chipSupport for DTS:XŽ UltraHigh
Definition Audio2/4/5.1-channel* You can change the functionality of an audio
jack using the audio software. To configure 5.1-channel audio, access the audio
software for audio settings.Support for S/PDIF OutMarvellŽ AQtion AQC113C 10GbE
LAN chip(10 Gbps/5 Gbps/2.5 Gbps/1 Gbps/100 Mbps)QualcommŽ Wi-Fi 7 QCNCM865 (PCB
rev. 1.0)- 802.11a, b, g, n, ac, ax, be, supporting 2.4/5/6 GHz carrier
frequency bands- BLUETOOTH 5.3- Support for 11be 320MHz wireless standard(Actual
data rate may vary depending on environment and equipment.)CPU:- 1 x PCI Express
x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16)* The PCIEX16 slot
shares bandwidth with the M2C_CPU connector. The PCIEX16 slot operates at up to
x8 mode when a device is installed in the M2C_CPU connector.* For optimum
performance, if only one PCI Express graphics card is to be installed, be sure
to install it in the PCIEX16 slot.Chipset:- 1 x PCI Express x16 slot, supporting
PCIe 3.0 and running at x4 (PCIEX4)- 1 x PCI Express x16 slot, supporting PCIe
3.0 and running at x1 (PCIEX1)CPU:- 1 x M.2 connector (Socket 3, M key, type
25110/2280 PCIe 5.0 x4/x2 SSD support) (M2C_CPU)- 1 x M.2 connector (Socket 3, M
key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)Chipset:- 1 x M.2
connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support)
(M2Q_SB)- 1 x M.2 connector (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD
support)(M2P_SB)- 1 x M.2 connector (Socket 3, M key, type 2280 SATA and PCIe
4.0 x4/x2 SSD support) (M2M_SB)- 4 x SATA 6Gb/s connectorsRAID 0, RAID 1, RAID5,
and RAID 10 support for NVMe SSD storage devicesRAID 0, RAID 1, RAID5, and RAID
10 support for SATA storage devicesChipset:- 3 x USB Type-CŽ ports, with USB 3.2
Gen 2x2 support (2 ports on the back panel, 1 port available through the
internal USB header)Chipset+2 USB 3.2 Gen 2 Hubs:- 1 x USB Type-CŽ port on the
back panel, with USB 3.2 Gen 1 support- 7 x USB 3.2 Gen 2 Type-A ports (red) on
the back panelChipset+2 USB 3.2 Gen 1 Hubs:- 8 x USB 3.2 Gen 1 ports (4 ports on
the back panel, 4 ports available through the internal USB headers)Chipset+USB
2.0 Hub:- 4 x USB 2.0/1.1 ports available through the internal USB headers1 x
24-pin ATX main power connector2 x 8-pin ATX 12V power connectors1 x CPU fan
header1 x CPU fan/water cooling pump header4 x system fan headers4 x system
fan/water cooling pump headers3 x addressable RGB Gen2 LED strip headers1 x RGB
LED strip header5 x M.2 Socket 3 connectors4 x SATA 6Gb/s connectors1 x front
panel header1 x front panel audio header1 x USB Type-CŽ header, with USB 3.2 Gen
2x2 support2 x USB 3.2 Gen 1 headers2 x USB 2.0/1.1 headers1 x noise detection
header2 x Thunderbolt? add-in card connectors1 x Trusted Platform Module header
(For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0/GC-TPM2.0 SPI V2 module only)1 x power
button1 x reset button1 x reset jumper1 x Clear CMOS jumper2 x temperature
sensor headersVoltage Measurement Points1 x Q-Flash Plus button1 x Clear CMOS
button2 x SMA antenna connectors (2T2R)1 x DisplayPort1 x USB Type-CŽ port, with
USB 3.2 Gen 1 support2 x USB Type-CŽ ports, with USB 3.2 Gen 2x2 support7 x USB
3.2 Gen 2 Type-A ports (red)4 x USB 3.2 Gen 1 ports1 x RJ-45 port1 x optical
S/PDIF Out connector2 x audio jacksiTEŽ I/O Controller ChipVoltage
detectionTemperature detectionFan speed detectionWater cooling flow rate
detectionFan fail warningFan speed control* Whether the fan (pump) speed control
function is supported will depend on the fan (pump) you install.Noise detection1
x 256 Mbit flashUse of licensed AMI UEFI BIOSPnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS
2.7, ACPI 5.0Support for GIGABYTE Control Center (GCC)* Available applications
in GCC may vary by motherboard model. Supported functions of each application
may also vary depending on motherboard specifications.Support for Q-FlashSupport
for Q-Flash PlusSupport for Smart BackupNortonŽ Internet Security (OEM
version)LAN bandwidth management softwareSupport for Windows 11 64-bitE-ATX Form
Factor; 30.5cm x 26.0cm